Usb File Upload; Download File To Switch - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

USB File Upload

Use this menu to upload a file from the switch to USB device.
To display the Upload File to USB page, click Maintenance
1. Use File Type to specify what type of file you want to upload:
a. Use Archive to specify archive (STK) code when you want to retrieve from the
operational flash.
• Image1 - Specify the code image1 when you want to retrieve.
• Image2 - Specify the code image2 when you want to retrieve.
b. Use Text Configuration to specify configuration in text mode when you want to
retrieve the stored configuration.
The factory default is image1.
2. Use USB File to specify a name along with path for the file you want to upload. You may
enter up to 32 characters. The factory default is blank.
3. The last row of the table is used to display information about the progress of the file transfer.

Download File To Switch

The switch supports system file downloads from a remote system to the switch by using
either TFTP or HTTP.
The Download menu contains links to the following options:
• File Download
• HTTP File Download
• USB File Download
on page 588
on page 589
on page 592
 
Upload USB File Upload.
Chapter 8. Maintenance | 587