Authentication List Configuration - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

Authentication List Configuration

The Authentication List folder contains links to the following features:
• Login Authentication List
• Enable Authentication List
• Dot1x Authentication List
• HTTP Authentication List
• HTTPS Authentication List
Login Authentication List
You use this page to configure login lists. A login list specifies the authentication method(s)
you want to be used to validate switch or port access for the users associated with the list.
The pre-configured users, admin and guest, are assigned to a pre-configured list named
defaultList, which you may not delete. All newly created users are also assigned to the
defaultList until you specifically assign them to a different list
To display the Login Authentication List page, click Security
Authentication List
on page 443
on page 445
on page 447
on page 448
on page 449

Login Authentication List.

Management Security >
Chapter 6. Managing Device Security | 443