Ospf Neighbor Table - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

OSPF Neighbor Table

This screen displays the OSPF neighbor table list. When a particular neighbor ID is specified,
detailed information about a neighbor is given. The information below will only be displayed if
OSPF is enabled.
To display the OSPF Neighbor Table page, click Routing
Neighbor Table.
Table 34.
Field
Interface
Router ID
Neighbor IP Address
Area ID
Options
Router Priority
288 | Chapter 4. Routing
Description
Displays the interface for which data is to be displayed or configured. Slot 0 is the
base unit.
A 32-bit integer in dotted decimal format representing the neighbor interface.
The IP address of the neighboring router's interface to the attached network. It is
used as the destination IP address when protocol packets are sent as unicasts
along this adjacency. Also used in router-LSAs as the Link ID for the attached
network if the neighboring router is selected to be designated router. The Neighbor
IP address is learned when Hello packets are received from the neighbor. For
virtual links, the Neighbor IP address is learned during the routing table build
process.
The area ID of the OSPF area associated with the interface.
An integer value that indicates the optional OSPF capabilities supported by the
neighbor. The neighbor's optional OSPF capabilities are also listed in its Hello
packets. This enables received Hello Packets to be rejected (i.e., neighbor
relationships will not even start to form) if there is a mismatch in certain crucial
OSPF capabilities.
The OSPF priority for the specified interface. The priority of an interface is a priority
integer from 0 to 255. A value of '0' indicates that the router is not eligible to
become the designated router on this network.
  
OSPF Advanced OSPF