Http File Upload - NETGEAR GSM7212P User Manual

Use Server Address Type to specify either IPv4 or IPv6 to indicate the format of the Server
3.
Address field. The factory default is IPv4.
Use Server Address to enter the IP address of the server in accordance with the format
4.
indicated by the Seer Address Type. The factory default is the IPv4 address 0.0.0.0.
Use Remote File Name to enter the name of the file you want to download from the server.
5.
You may enter up to 32 characters. The factory default is blank.
Use User Name to enter the username for remote login to SFTP/SCP server where the file
6.
will be sent. This field is visible only when SFTP or SCP transfer modes are selected.
Use Password to enter the password for remote login to SFTP/SCP server where the file
7.
will be sent. This field is visible only when SFTP or SCP transfer modes are selected.
The last row of the table is used to display information about the progress of the file transfer.
8.

HTTP File Upload

To display the HTTP File Upload page, click Maintenance
Use File Type to specify what type of file you want to upload:
1.
Archive - Specify archive (STK) code when you want to retrieve from the operational
•
flash:
Image1 - Specify the code image1 when you want to retrieve.
•
Image2 - Specify the code image2 when you want to retrieve.
•
CLI Banner - Specify CLI Banner when you want retrieve the CLI banner file.
•
Startup Configuration - Specify configuration when you want to retrieve the stored
•
configuration.
Text Configuration - Specify configuration in text mode when you want to retrieve the
•
stored configuration.
Script File - Specify script file when you want to retrieve the stored configuration.
•
Error Log - Specify error log to retrieve the system error (persistent) log, sometimes
•
referred to as the event log.
Trap Log - Specify trap log to retrieve the system trap records.
•
Buffered Log - Specify buffered log to retrieve the system buffered (in-memory) log.
•
Tech Support - Specify Tech Support to retrieve the switch information needed for
•
troubleshooting.
The factory default is Archive.
Web Management User Guide
341
 
Upload HTTP File Upload.