Appendix A Default Settings - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Prosafe gigabit l3 managed switch web management user manual
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- Software administration manual (562 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
Default Settings
A.
This appendix describes the default settings for many of the NETGEAR 7000 series Managed
Switch software features.
Table 9. Default Settings
Feature
IP address
Subnet mask
Default gateway
Protocol
Management VLAN ID
Minimum password length
IPv6 management mode
SNTP client
SNTP server
Global logging
CLI command logging
Console logging
RAM logging
Persistent (FLASH) logging
DNS
SNMP
SNMP Traps
Auto Install
Default
169.254.100.100
255.255.0.0
0.0.0.0
DHCP
1
8 characters
Enabled
Enabled
time-d.netgear.com
Enabled
Disabled
Enabled (Severity level: debug and above)
Enabled (Severity level: debug and above)
Disabled
Enabled (No servers configured)
Enabled (SNMPv1/SNMPv2, SNMPv3)
Enabled
Enabled
Appendix A. Default Settings
A
| 604
- Quick Links:
- Web Access
- Factory Default
Hide quick links:
Advertisement
Chapters
Table of Contents
