NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 225

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Table 10.
Field
IcmpInErrors
IcmpInDestUnreachs
IcmpInTimeExcds
IcmpInParmProbs
IcmpInSrcQuenchs
IcmpInRedirects
IcmpInEchos
IcmpInEchoReps
IcmpInTimestamps
IcmpInTimestampReps
IcmpInAddrMasks
IcmpInAddrMaskReps
IcmpOutMsgs
IcmpOutErrors
IcmpOutDestUnreachs
IcmpOutTimeExcds
Description
The number of ICMP messages which the entity
received but determined as having ICMP-specific
errors (bad ICMP checksums, bad length, etc.).
The number of ICMP Destination Unreachable
messages received.
The number of ICMP Time Exceeded messages
received.
The number of ICMP Parameter Problem messages
received.
The number of ICMP Source Quench messages
received.
The number of ICMP Redirect messages received.
The number of ICMP Echo (request) messages
received.
The number of ICMP Echo Reply messages
received.
The number of ICMP Timestamp (request)
messages received.
The number of ICMP Timestamp Reply messages
received.
The number of ICMP Address Mask Request
messages received.
The number of ICMP Address Mask Reply
messages received.
The total number of ICMP messages which this
entity attempted to send. Note that this counter
includes all those counted by icmpOutErrors.
The number of ICMP messages which this entity did
not send due to problems discovered within ICMP
such as a lack of buffers. This value should not
include errors discovered outside the ICMP layer
such as the inability of IP to route the resultant
datagram. In some implementations there may be no
types of error which contribute to this counter's
value.
The number of ICMP Destination Unreachable
messages sent.
The number of ICMP Time Exceeded messages
sent.
Chapter 4. Routing | 225