ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Local User
From the Local User link, you can access the following pages:
•
User Management
•
User Password Configuration
User Management
By default, two user accounts exist:
•
admin, with 'Read/Write' privileges
•
guest, with 'Read Only' privileges
By default, both of these accounts have blank passwords. The names are not case sensitive.
If you logon with a user account with 'Read/Write' privileges (i.e. as admin) you can use the
User Accounts screen to assign passwords and set security parameters for the default
accounts, and to add and delete accounts (other than admin) up to the maximum of six. Only
a user with 'Read/Write' privileges may alter data on this screen, and only one account may
be created with 'Read/Write' privileges.
428 |
Chapter 6. Managing Device Security
on page 428
on page 430