NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 55

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Table 2-17.
Field
Type of Binding
Network Address
Network Mask
Network Prefix Length
Client Name
Hardware Address
Hardware Address Type
Client ID
Host Number
Host Mask
Host Prefix Length
Lease Time
Description
Specifies the type of binding for the pool.
•
Unallocated
•
Dynamic
• Manual
Specifies the subnet address for a DHCP address of
a dynamic pool.
Specifies the subnet number for a DHCP address of
a dynamic pool. Either Network Mask or Prefix
Length can be configured to specify the subnet mask
but not both.
Specifies the subnet number for a DHCP address of
a dynamic pool. Either Network Mask or Prefix
Length can be configured to specify the subnet mask
but not both. Valid Range is (0 to 32)
Specifies the Client Name for DHCP manual Pool.
Specifies the MAC address of the hardware platform
of the DHCP client.
Specifies the protocol of the hardware platform of the
DHCP client. Valid types are ethernet and ieee802.
Default value is ethernet.
Specifies the Client Identifier for DHCP manual Pool.
Specifies the IP address for a manual binding to a
DHCP client. Host can be set only if at least one
among of Client Identifier or Hardware Address is
specified. Deleting Host would delete Client Name,
Client ID, Hardware Address for the Manual Pool and
set the Pool Type to Unallocated.
Specifies the subnet mask for a manual binding to a
DHCP client. Either Host Mask or Prefix Length can
be configured to specify the subnet mask but not
both.
Specifies the subnet mask for a manual binding to a
DHCP client. Either Host Mask or Prefix Length can
be configured to specify the subnet mask but not
both. Valid Range is (0 to 32)
Can be selected as "Infinite" to specify lease time as
Infinite or "Specified Duration" to enter a specific
lease period. In case of dynamic binding infinite
implies a lease period of 60 days and In case of
manual binding infinite implies indefinite lease
period. Default Value is "Specified Duration".
Chapter 2. Configuring System Information | 55