ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Table 4.
Field
Firmware Version
Power Status
Total Power (Main AC)
Total Power (RPS)
Power Source
Threshold Power
Consumed Power
90 |
Chapter 2. Configuring System Information
Definition
Version of the PoE controller's firmware image.
Indicates the power status.
Maximum amount of power the system can deliver to
all ports when the PoE unit is powered up by Main
AC Supply.
Maximum amount of power the system can deliver to
all ports when the PoE unit is powered up by RPS
unit.
The power source. There are two possible power
sources: Main AC or RPS.
System can powerup one port, if consumed power is
less than this power, i.e., Consumed power can be
between Nominal and Threshold Power values. The
threshold power value is effected by changing
System Usage Threshold.
Total amount of a power which is currently being
delivered to all ports.