ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
TACACS+ Configuration
The TACACS+ Configuration page contains the TACACS+ settings for communication
between the switch and the TACACS+ server you configure via the inband management
port.
To display the TACACS+ Configuration page, click Security
TACACS+
TACACS+ Configuration.
To configure global TACACS+ settings:
1.
In the Key String field, specify the authentication and encryption key for TACACS+
communications between the Managed Switch and the TACACS+ server. The valid
range is 0–128 characters. The key must match the key configured on the TACACS+
server.
2.
In the Connection Timeout field, specify the maximum number of seconds allowed to
establish a TCP connection between the Managed Switch and the TACACS+ server.
3.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4.
If you make any changes to the page, click Apply to apply the new settings to the system.
Management Security >
Chapter 6. Managing Device Security
| 441