Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
5.1.1.1 no spanning-tree
This command sets the spanning-tree operational mode to disabled. While disabled, the
spanning-tree configuration is retained and can be changed, but is not activated.
Format
Mode
5.1.2 spanning-tree bpdumigrationcheck
This command enables BPDU migration check on a given interface. The all option
enables BPDU migration check on all interfaces.
Format
Mode
5.1.2.1 no spanning-tree bpdumigrationcheck
This command disables BPDU migration check on a given interface. The all option
disables BPDU migration check on all interfaces.
Format
Mode
5.1.3 spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the
configuration that this switch is currently using. The
characters.
Default
Format
Mode
5.1.3.1 no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
Mode
5-2
no spanning-tree
Global Config
spanning-tree bpdumigrationcheck {<unit/slot/port>
| all}
Global Config
no spanning-tree bpdumigrationcheck {<unit/slot/
port> | all}
Global Config
base MAC address in hexadecimal notation
spanning-tree configuration name <name>
Global Config
no spanning-tree configuration name
Global Config
v4.1, October 2008
is a string of up to 32
<name>
Spanning Tree Protocol Commands