Radius Port Command; Radius Secret Command; Radius Show Command - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
<addr>
This command sets the external RADIUS server IP address.
30.2.12

RADIUS Port Command

Syntax:
192.168.1.1 dot1x> radius port <portnum>
where
<portnum>
This command sets the external RADIUS server UDP port number.
30.2.13

RADIUS Secret Command

Syntax:
192.168.1.1 dot1x> radius secret <secret>
where
<secret>
This command sets the authentication and encryption key.
30.2.14

RADIUS Show Command

Syntax:
192.168.1.1 dot1x> radius show
This command displays the external RADIUS server settings.
30-4
= The IP address of the external RADIUS server.
= The UDP port number of the external RADIUS server.
= A password (up to 31 alphanumeric characters) to be shared between the
external RADIUS server and the IES-1000. This key is not sent over the
network. This key must be the same on the external RADIUS server and the
IES-1000.
IEEE 802.1X Commands