This chapter describes some commands in more detail.
41.1 Overview
These are commands that you may use frequently in maintaining your switch.
41.2 show Commands
These are the commonly used
41.2.1 show system-information
Syntax:
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
Figure 159 show system-information Command Example
ras> show system-information
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ras>
Chapter 41 Command Examples
Command Examples
commands.
show
show system-information
:
:
:
: 00:13:49:1c:a2:9f
: V3.60(TS.2)| 10/11/2005
: 3430448
:
3:18:31 (122ce8 ticks)
: V3.0 | 04/08/2005
GS-4012F/4024 User's Guide
C
H A P T E R
4 1
268