Set Port Command; Set Pvc Command - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
192.168.1.1 gshdsl> show profiles
The show profiles command displays the settings of all the G.SHDSL profiles.
25.3.15

Set Port Command

Syntax:
192.168.1.1 gshdsl> set port <port #> <profile name>
where
<port #>
<profile name> =
The set port command assigns a specific profile to an individual port. The profile defines the maximum
and minimum transmission rates and the Power Spectral Density region.
25.3.16 Set Ports Command
Syntax:
192.168.1.1 gshdsl> set ports <profile name>
where
<profile name> =
This CI command is like the Set Port Command described in section 25.3.15 except that this command
configures all G.SHDSL ports to have a specified profile. Enter the list ports command to view the status
of all ports.
25.3.17

Set PVC Command

Syntax:
192.168.1.1 gshdsl> set pvc <port #> <multiplexing mode> <tx vpi> <tx vci>
[<rx vpi> <rx vci>]
where
<port #>
<multiplexing mode>
<tx vpi>
<tx vci>
<rx vpi>
<rx vci>
25-8
= The number of the port to which you want to assign a profile.
The profile that defines the minimum and maximum transfer rates for this
port.
The profile that defines the minimum and maximum transfer rates for this
port.
= A port number, from 1 to 8.
= Either "llc" or "vc"
= The VPI setting of the G.SHDSL port for use with a Tx based
network.
= The VCI setting for the G.SHDSL port for use with a Tx based
network.
= The VPI setting for the G.SHDSL port for use with Rx based
networks.
=
The VCI setting for the G.SHDSL port for use with Rx based
k
G.SHDSL Commands