Troubleshooting; Error & Status Messages On The Control Panel - Ricoh CL1000N User Manual

Error & Status Messages on the Control
Panel
❖ ❖ ❖ ❖ Status Messages
Messages/Second messages
Calibrating...
Energy Save Mode
Hex Dump Mode
Offline
Processing...
Ready
Resetting Job...
Setting change
in process
Waiting...
Warming Up...

5. Troubleshooting

The printer is calibrating the color. Wait until "Ready" appears
on the panel display.
The printer is in Energy Saver (low-power) mode. No action is
required.
The printer receives data in hexadecimal numbers in Hex
Dump mode. Turn off the printer after printing, and then turn
it back on.
The printer is offline. Make the printer online by pressing the
{ { { { On Line} } } } key to start printing.
The printer is processing the print job. Wait for a while.
The default ready message. The printer is ready for use. No ac-
tion is required.
The printer is resetting the print job. Wait until "Ready" ap-
pears on the panel display.
During offline applications, setting change is currently in process.
The printer is waiting for the next data to print. Wait for a
while.
The printer is warming up and not ready. Wait until "Ready"
appears on the panel display.
Status
51