Paper Recommendations; Loading Paper; Storing Paper; Types Of Paper And Other Media - Ricoh CL1000N User Manual

Paper Recommendations

Loading Paper

Important
❒ Do not use ink-jet printer paper. The sheets may curl around the fusing unit,
causing a malfunction.
❒ Set the paper as described below
• Tray 1: Print side facing up
• Paper Feed Unit (Tray 2): Print side facing up
❒ Print quality cannot be guaranteed if paper other than the ones recommended
is used. For more information about recommended paper, contact your sales
or service representative.

Storing Paper

• Paper should always be stored properly. Improperly stored paper might re-
sult in poor print quality, paper misfeeds, or printer damage. Recommenda-
tions are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep paper in the package in which the paper came.

Types of Paper and Other Media

Plain Paper
Paper thickness
Printer setup
Printer driver setup
Enabled paper feeding tray Tray 1, 2
Number of sheets that can
be set
Two-sided printing
Additional cautions
2
60 - 105 g/m
Make the following two settings using the control panel:
• Press [Paper Input]menu, [Paper Type], and then[Plain Paper].
• press [Maintenance] menu, and then [PlainPaper Type] to select
the regular paper thickness.
Click [Plain Paper] in the [Paper Type] list.
• Tray 1: 250
• Tray 2: 530
Note
❒ Make sure paper is not stacked higher than the PAPER upper
limit mark (T) inside the tray.
Possible
When printing on 91 - 105 g/m
slower to when printing on paper of 60 - 91 g/m
Paper Recommendations
2
paper, print speed is slightly
2
.
2
19