Ricoh CL1000N User Manual page 522

Message
phy release file open failed.
Print queue <print queue name> cannot be serviced by
printer 0, <print server name>
Print server <print server name> has no printer.
print session full
Printer <printer name> has no queue
pserver start. (NetWare)
Required computer name (<Computer name>) is dupli-
cated name
Required file server (<file server name>) not found
restarted.
sap enable, saptype=<SAP type>, sapname=<SAP
name>
session<community name>already defined.
session_ipx<community name> not defined.
Set context to <NDS context name>
Operating Instructions
Description and Solutions
Replacing the Network Interface Board is required. Con-
tact your sales or service representatives.
(In print server mode) The print queue name cannot be
serviced. Make sure that print queue volume exists on the
specified file server.
(In print server mode) The printer object is not assigned to
the print server <print server name>. Using NWadmin, as-
sign the printer object, and then restart the printer device.
Cannot accept the print session.
(In print server mode) The print queue is not assigned to
the printer. Using NWadmin, assign the print queue to the
printer, and then restart it.
(In print server mode) NetWare service has started.
The same computer name is detected on the network. The
start job determines the computer name by adding the
computer name to the suffix (0,1....). Configure a new
computer name that is unique.
Cannot find the required file server.
LPD has started.
The SAP function has started. The SAP (SAP type and
SAP name) packet is issued to advertise the service on the
SAP table on the NetWare server.
A requested community name is not defined.
A requested community name is not defined.
A <NDS context name> has been set.
Administrator Reference
297