Paper Not Supported By This Printer - Ricoh CL1000N User Manual

Paper and Other Media
Glossy paper
Printer setup
Printer driver setup
Enabled paper feeding tray Tray 1
2
Number of sheets that can
be set
Two-sided printing
Additional cautions

Paper not supported by this printer

Avoid using the following paper as they are not supported by this printer.
• Paper meant for an ink-jet printer
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead
Malfunctions are especially likely when using paper printed on by other than
a laser printer (e.g. monochrome and color copiers, ink-jet printers, etc.).
• Special paper, such as thermal paper, aluminum foil, carbon paper and con-
ductive paper
• Paper whose weight is heavier or lighter than the limitation.
• Paper with windows, holes, perforations, cutouts, or embossing
• Adhesive label paper on which glue or base paper is exposed
• Paper with clips or staples
22
Press [Paper Input] menu, [Paper Type], and then [Glossy] on the con-
trol panel.
Click [Glossy] in the [Paper Type] list.
40
Note
❒ Make sure paper is not stacked higher than the CARDSTOCK
upper limit mark (T) inside the tray.
Not possible
• Print speed for glossy papers is slower than for plain paper.
• Due to switching modes, the machine will be on standby for
thirty or forty seconds after the job was received.