Ricoh CL1000N User Manual page 456

lpr
When specifying a printer by IP address
c:> lpr -Sprinter's IP address
[ - P o p t i o n ]
name\file name
When using a host name instead of an IP
address
c:> lpr -Sprinter's host name
[ -P o pt io n]
name\file name
Note
When printing a binary file, add the "-ol"
option (lower case O, and lower case L).
When using a printer with the host name
"host", to print a PostScript file named "file1"
located in the C:PRINT directory, the com-
mand line is as follows:
c:> lpr -Shost -Pfiletype=RPS
-ol C:PRINT\file1
Operating Instructions
[ - o l ] \ p a s s
[ -o l] \ pa ss
Administrator Reference
rcp
Register the printer's host name in the hosts file
beforehand. See p.228 "Using a Host Name In-
stead of an IP Address".
c:> rcp [-b] \pass name\file name
[pass name\file name...] print-
er's host name:[option]
Note
In the file names, "*" and "?" can be used as
wild cards.
When printing a binary file, add the "-b" option.
When using a printer with the host name "host",
to print a PostScript file named "file1" or "file2"
located in the C:PRINT directory, the command
line is as follows.
c : > r c p - b
C:PRINT\file2 host:filetype=RPS
C : \ P R I N T \ f i l e 1
231