Quick Install - Ricoh CL1000N User Manual

1. Quick Install

You can easily install the software from the CD-ROM enclosed with the printer.
When [Quick Install] is clicked, the RPCS and PCL 5c printer drivers are installed in the computer al-
lowing the printer to be used by the computer.
In the case of TCP/IP, the software, SmartDeviceMonitor for Client, is also installed.
Limitation
The OS requirements for the software are as indicated below.
• Windows 95/98/Me/2000/XP, Windows Server 2003 or Windows NT 4.0
The following requirements must be satisfied in the case of TCP/IP.
• The printer and network must be connected with an ethernet cable.
• A TCP/IP protocol must be set.
• IP address must be set for the printer and the computer.
Quick Install
Limitation
If your system is Windows 2000/Windows XP/Server 2003 or Windows NT 4.0, installing a printer
driver by Auto Run requires Administrators permission. When you install a printer driver by Auto
Run, log on using an account that has Administrators permission.
Note
Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe" lo-
cated on the CD-ROM root directory.
A A A A
Close all applications that are running.
B B B B
Insert the CD-ROM into the CD-ROM drive.
Auto Run will start the installer.
Operating Instructions Client Reference
20