Ricoh CL1000N User Manual page 335

J J J J
Create a printer as follows:
A Select the container object the printer is located in, and then click [Create] in the [Object]
menu.
B In the [Class of new object] box, click "Printer", and then click [OK]. When you are using
NetWare 5, click "Printer (Non NDPS)".
C In the [Printer name] box, type the name of the printer.
D Click [Define additional properties] to check a box, and then click [Create].
K K K K
Assign print queues to the created printer as follows:
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the drop-down
menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and then click [OK].
E After confirming the settings, click [OK].
L L L L
Create a print server as follows:
A Select the context specified using the NIB Setup Tool (Step
menu, click [Create].
B In the [Class of new object] box, click "Print Server", and then click [OK]. When you are us-
ing NetWare 5, click "Print Sever (Non NDPS)".
C In the [Print Server name] box, type the name of the print server.
Important
Use the same name as that specified using the NIB Setup Tool. (Step
D Click [Define additional properties] to check a box, and click [Create].
Operating Instructions Administrator Reference
I
, and then click [OK].
A A A A
I
), and on the [Object]
-
F - B).
110