Ricoh CL1000N User Manual page 743

- If a message is displayed during installation of the printer driver -
- -
When there is a driver in the computer that is newer than the one currently being installed, a message
dialog box appears.
In such a case, you cannot install with the Auto Run program. Use the driver that was used in installing
the driver that is displayed in the message, and reinstall with [Add Printer].
A
Click [Start], point to [Settings], and then click [Printers].
B
Double-click the [Add Printer] icon.
C
Follow the wizard to install the driver.
If the printer driver disk is a CD-ROM, the sources of installation are as follows. If the installer starts
up, click [Cancel] to quit it.
If the CD-ROM drive is D, the locations where each printer driver is stored are as indicated below.
• RPCS
D:\DRIVES\RPCS\WIN9X_ME\(Language)\DISK1
• PCL 5c
D:\DRIVES\PCL5c\WIN9X_ME\(Language)\DISK1
• PostScript 3
D:\DRIVES\PS3\WIN9X_ME\(Language)\DISK1
Operating Instructions Client Reference
177