Ricoh Aficio CL5000 Setup Manual
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Printer
  5. Aficio CL5000
  6. Setup manual
Ricoh Aficio CL5000 Setup Manual

Ricoh Aficio CL5000 Setup Manual

Option setup guide
Hide thumbs Also See for Aficio CL5000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance Manual, Manual
Option Setup Guide
For safety, please read this manual carefully before you use this product and keep it handy
for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Ricoh Aficio CL5000

Summary of Contents for Ricoh Aficio CL5000

  • Page 1 Option Setup Guide For safety, please read this manual carefully before you use this product and keep it handy for future reference.
  • Page 2 Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Do not attempt any maintenance or troubleshooting other than that mentioned in this manual. This printer contains a laser beam generator and direct exposure to laser beams can cause permanent eye damage. Notes: Some illustrations in this manual might be slightly different from the machine.

  • Page 3: Table Of Contents

    Using the Output Guide...23 Mail Bin Type 5000 (4-bin Mailbox) ...24 Memory Unit Type C (SDRAM Module) ... 28 Printer Hard Disk Type 5000 ...32 1394 Interface Unit Type 4510...36 Connecting the cable to the 1394 Interface Unit ... 40 802.11b Interface Unit Type A...41...

  • Page 5: How To Read This Manual

    How to Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. R CAUTION: This symbol indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

  • Page 7: Options

    • When lifting the machine, use the grips on both sides. The machine could break or cause an injury if dropped. By installing options, you can improve the printer performance and have an ex- panded variety of features to use. For the specifications of each option, see the Administrator Reference.
  • Page 8 (User Account Enhance Unit Type B) Install options in the positions as shown in the illustration. Attach to the top of the printer after attaching the Inter- change Unit. If you choose to attach the 4-bin Mailbox, you cannot attach the 500-sheet Finisher.
  • Page 9 ❒ Attach the Interchange Unit before attaching the Duplex Unit, 500-sheet Finisher or 4-bin Mailbox. ❒ You can attach either one of the 500-sheet Finisher or 4-bin Mailbox to the printer. Duplex Unit Type 5000 Makes duplex prints. ⇒ p.15 “Duplex Unit Type 5000”...
  • Page 10 ❒ Remove USB2.0 Interface Board when you install 1394 Interface Unit or 802.11b Intaerface Unit. ❒ 1394 Interface Unit, 802.11b Interface Unit and USB2.0 Interface Board cannot be installed in the printer at the same time. 1394 Interface Unit Type 4510 ⇒ p.36 “1394 Interface Unit Type 4510”...

  • Page 11: Paper Feed Unit Type 5000

    Note ❒ Be sure to work in a place with enough space, so that you can get in the back of the printer. C C C C Remove the adhesive tapes. D D D D Open the tray of the Paper Feed...
  • Page 12 ❒ Be sure to pull out the handles all the way. H H H H Lift the printer, adjust the front sides of the printer and the Paper Feed Unit, and then lower the printer slowly into place of the Paper Feed Unit.
  • Page 13 L L L L Close Tray 1 firmly. M M M M Place the two metal fittings on the back of the printer, and then fas- ten the screws (for the rear) over them as shown in the illustration. ZESP008J Use a coin to fasten them tightly.
  • Page 14 Options ❒ If the Paper Feed Unit is not in- stalled properly, reinstall from step . If you cannot install it properly even after reinstalla- tion, contact your sales or ser- vice representative. Reference See "Using the Control Panel" in the Administrator Reference for printing the configuration page.

  • Page 15: Interchange Unit Type 5000

    Open the right cover of the print- er by pushing up the handle. E E E E Stand on the right of the printer, and then remove the upper right cover of the printer. A Open the upper right cover.
  • Page 16 Interchange Unit. A Hold the unit with both hands, and then slide with the metal part (A A A A ) of the Interchange Unit touching the metal part (B B B B ) of the printer. ZESP255J ZESP901J ZESP903J...
  • Page 17 Insert the unit by sliding it onto the printer as shown in the illus- tration. B Open the right cover of the In- terchange Unit. C Press the two projections on the Interchange Unit so that they securely fit into the holes of the printer.
  • Page 18 Unit that you removed in G G G G step . First, put it on the front side of the printer (A A A A ), and then push the other end until it clicks into its place (B B B B ). Note ❒...

  • Page 19: Duplex Unit Type 5000

    Duplex Unit Type 5000 Preparation Install the Interchange Unit before installing the Duplex Unit. The Duplex Unit cannot be installed without the Interchange Unit in- stalled in advance. ⇒ p.11 “Inter- change Unit Type 5000”. R CAUTION: • The inside of the machine be- comes very hot.
  • Page 20 A Remove the two small covers from the Interchange Unit. Note ❒ The removed covers will not be used. B Remove the three small covers (A, B, C) from the printer. Note ZESP056J ❒ The removed covers will not be used. E E E E Attach the metal fittings using the wrench and the screws supplied.
  • Page 21 ❒ Remove paper on the Bypass Tray to prevent them from fall- ing. G G G G From the right side of the printer, hold the Duplex Unit with both hands, and then insert its projec- tions to the (B) and (C) on the printer over the Bypass Tray as shown in the illustration.
  • Page 22 Extend the supporting bar on the Duplex Unit, and then connect it to the metal fitting (A) that has been attached to the printer. Connect the bar firmly by pushing it to the right as shown in the illus- tration.
  • Page 23 M M M M Remove the adhesive tape that is fastening the cable, and then con- nect it to the Interchange Unit. N N N N Close the Bypass Tray. Note ❒ After finishing installation, you can check whether the Duplex Unit is installed properly.

  • Page 24: Sr780 (500-Sheet Finisher)

    Important ❒ Since either the Finisher or the 4- bin Mailbox can be installed to the printer, the Finisher cannot be in- stalled if the 4-bin Mailbox is al- ready installed to the printer. A A A A Turn off the power switch, and then unplug the power cable.
  • Page 25 ❒ The removed cover will not be used. E E E E Hold the Finisher with both hands, and then slowly insert it vertically to the top of the printer. F F F F Open the Bypass Tray. SR780 (500-sheet Finisher) Note ❒...
  • Page 26 Options J J J J Fasten the two places with two differe nt kinds of scre ws as shown in the illustration. Use a coin to fasten them tightly. Note ❒ There are two kinds of screws supplied. K K K K Close the right cover of the Inter- change Unit.

  • Page 27: Using The Output Guide

    P P P P Set the output tray. A Insert the output tray into the F i n i s h e r i n t h e d i r e c t i o n shown. Note ❒ Be sure to insert it until it stops.

  • Page 28: Mail Bin Type 5000 (4-Bin Mailbox)

    Important ❒ Since either the Finisher or the 4- bin Mailbox can be installed to the printer, the 4-bin Mailbox cannot be installed if the Finisher is al- ready installed to the printer. A A A A Turn off the power switch, and then unplug the power cable.
  • Page 29 ❒ The removed cover will not be used. E E E E Hold the 4-bin Mailbox with both hands, and then slowly insert it vertically to the top of the printer. F F F F Open the Bypass Tray. Mail Bin Type 5000 (4-bin Mailbox) Note ❒...
  • Page 30 Options J J J J Fasten the two places with two differe nt kinds of scre ws as shown in the illustration. Use a coin to fasten them tightly. Note ❒ There are two kinds of screws supplied. K K K K Close the right cover of the Inter- change Unit.
  • Page 31 P P P P Set the four output trays from the bottom. Note ❒ Use the supplied labels to as- sign the trays for individuals or business groups. ❒ After finishing installation, you can check whether the 4-bin Mailbox is installed properly. Print the configuration page f r o m t h e "...

  • Page 32: Memory Unit Type C (Sdram Module)

    B B B B Remove the dustproof filter cover on the back of the printer. First, lift the cover by holding the bot- tom of it (A A A A ), and then remove it (B B B B ).
  • Page 33 E E E E Holding the handles, pull out the controller board slowly. There are two slots for the Memory Unit. Use the available slot (the one in the front in the illustration) to install an optional Memory Unit. Important ❒...
  • Page 34 Important ❒ The printer may not work prop- erly if the controller board is not set properly. J J J J Tighten the two screws that you...
  • Page 35 B B B B you removed in step sert the projections on the cover to the holes on the printer (A A A A ), and then push it down (B B B B ). Note ❒ After finishing installation, you can check whether the Memory Unit is installed properly.

  • Page 36: Printer Hard Disk Type 5000

    ❒ Do not subject the Printer Hard Disk to physical shocks. A A A A Check the contents. ❖ ❖ ❖ ❖ Printer Hard Disk Type 5000 ❖ ❖ ❖ ❖ Flat Cable ❖ ❖ ❖ ❖ Power Cable ❖ ❖ ❖ ❖ Four Screws...
  • Page 37 Printer Hard Disk Type 5000 G G G G Connect the flat cable (A A A A ) and the power cable (B B B B ) to the Printer Hard Disk. ZESHK750J Important ❒ The shape of the plugs of the power cable are different.
  • Page 38 Important ❒ The printer may not work prop- erly if the controller board is not set properly. K K K K Tighten the two screws that you...
  • Page 39 C C C C you removed in step sert the projections on the cover to the holes on the printer (A A A A ), and then push it down (B B B B ). When the power is turned on, the Printer Hard Disk will be format- ted automatically.

  • Page 40: 1394 Interface Unit Type 4510

    It may cause a machine malfunc- tion or a burn. Important ❒ Printing using "1394/Scsi Printer "(Windows 2000) device and "IEEE 1394 and SCSI printers" (Windows XP) with the optional 1394 Inter- face Unit is possible under Win- dows 2000 and Win dow s X P.
  • Page 41 C C C C Remove the dustproof filter cover on the back of the printer. First, lift the cover by holding the bot- tom of it (A A A A ), and then remove it (B B B B ).
  • Page 42 ❒ When installing other options on the controller board, do not close the controller board, but go to the steps for installing the option. ZESP120J Important ❒ The printer may not work prop- erly if the controller board is not set correctly. ZESP123J ZESP804J...
  • Page 43 N N N N Set the dustproof filter cover that you removed in step sert the projections on the cover to the holes on the printer (A A A A ), and then push it down (B B B B ). ZESH753J Note ❒...

  • Page 44: Connecting The Cable To The 1394 Interface Unit

    ❒ Either connector can be used. ❒ If you use a 6 pin × 6 pin inter- face cable, connect the end with the ferrite core to the printer. B B B B Connect the other end to the host computer.

  • Page 45: 802.11B Interface Unit Type A

    C C C C Remove the dustproof filter cover on the back of the printer. First, lift the cover by holding the bot- tom of it (A A A A ), and then remove it (B B B B ).
  • Page 46 It may cause dust to fall off. E E E E Remove the two screws that are fastening the controller board on the back of the printer. The removed screws will be used in step to fasten the controller board.
  • Page 47 ❒ When installing other options on the controller board, do not close the controller board, but go to the steps for installing the option. ZESPK920J Important ❒ The printer may not work prop- erly if the controller board is not set correctly. ZESPK930J ZESPK804J...
  • Page 48 E E E E to fasten the you removed in step sert the projections on the cover to the holes on the printer (A A A A ), and then push it down (B B B B ). ZESPK940J Note ❒...

  • Page 49: Ieee 802.11B (Wireless Lan) Configuration

    IEEE 802.11b (Wireless LAN) Configuration Configure the printer for using the IEEE 802.11b (Wireless LAN). The fol- lowing table shows the control panel settings and their default values. These items are included in the "Host Interface" menu. Setting Name Default Value Comm.

  • Page 50: Host Interface

    Options H H H H Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "IEEE 802.11b". Host Interface: IEEE 802.11b I I I I Press { { { { Enter #} } } } .
  • Page 51 ❒ If an SSID has been set, you can check the set SSID. Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to display "View", and then press the { { { { En- ter #} } } } key.
  • Page 52 Options D Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to se- lect characters, and then press the { { { { Enter #} } } } key. WEP Key: The pointer (k) moves to the next character position.

  • Page 53: User Account Enhance Unit Type B

    C C C C Remove the dustproof filter cover on the back of the printer. First, lift the cover by holding the bot- tom of it (A A A A ), and then remove it (B B B B ).
  • Page 54 It may cause dust to fall off. E E E E Remove the two screws that are fastening the controller board on the back of the printer. The removed screws will be used in step to fasten the controller board.
  • Page 55 Important ❒ The printer may not work prop- erly if the controller board is not set correctly. User Account Enhance Unit Type B J J J J...
  • Page 56 Set the dustproof filter cover that you removed in step sert the projections on the cover to the holes on the printer (A A A A ), and then push it down (B B B B ). Note ❒ After finishing installation, you...

  • Page 57: Index

    Memory Unit Type C (SDRAM Module) , 6 , 28 Options , 3 PAPER FEED UNIT Type 5000 , 5 , 7 Printer Hard Disk Type 5000 , 6 , 32 SR780 (500-sheet Finisher) , 5 , 20 User Account Enhance Unit Type B , 6 , 49...
  • Page 58 USA G071...
  • Page 59 Copyright © 2002...
  • Page 60 UE USA G071-7511A...

Table of Contents