Ricoh CL1000N User Manual page 496

Rendezvous
The "rendezvous" commands are used for rendezvous-related displays and settings.
View settings
This displays a list of rendezvous settings.
msh> rendezvous
Rendezvous Service Name Setting
You can specify the rendezvous service name.
msh> rendezvous cname "service name"
• The service name is specified using up to 63 alphanumeric characters.
• The current service name appears if a service name is not specified.
Rendezvous Installation Location Information Setting
You can enter information related to the location where the printer is installed.
msh> rendezvous location "location"
• Information related to installation location can be entered using up to 32 alphanumeric characters.
• The current installation location information appears if installation location information is not
entered.
Operating Instructions Administrator Reference
271