LPR Port
A Click [Add].
B Select [LPR Port], and then click [OK].
Note
If [LPR Port] is not displayed, "Microsoft TCP/IP Printing" is not installed. Click [Add] on the
[Service] tab to install "Microsoft TCP/IP Printing". For more information about installing the
"Microsoft TCP/IP Printing", see Windows NT 4.0 Help.
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click [OK].
J J J J
Make sure the location for the selected printer is shown after [Port:].
K K K K
Configure the default printer as necessary.
Default Printer
Check [Default Printer] to set the printer as the default printer.
L L L L
Click [Continue] to start printer driver installation.
M M M M
When the [Select Program] dialog box appears, click [Finish].
N N N N
When the installation completion dialog box appears, click [Finish].
O O O O
Set up the options.
Note
You must set up the options when the bidirectional transmission is disabled. For more informa-
tion about the status of the bidirectional transmission, see
Reference
For more information about option settings, see
Operating Instructions
p.154 "Bidirectional
p.153 "Setting Up
Client Reference
transmission".
Options".
141