Ricoh CL1000N User Manual page 81

Paper and Other Media
E E E E
Install the paper tray by pushing
it in until it clicks into place.
2
Important
❒ Be sure to insert the paper tray
completely. Otherwise, mis-
feeds might occur.
Selecting paper size Making Printer
Settings with the Control Panel
Use the following procedure to speci-
fy the paper size from the printer's
control panel after loading custom
size paper into the standard paper
tray.
Note
❒ You can set the custom size paper
in the standard tray only.
❒ When custom size paper is set, the
size set using the control panel is
given priority, when [Tray Locking]
is set to [On] in [Paper Input] menu.
The size set by the printer driver is
given priority when set to [Off].
26
A A A A
Press the { { { { Menu} } } } key.
Job Reset
Form Feed
"Menu" appears on the panel dis-
AAL214S
play.
B B B B
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Paper Input", and then
press the { { { { # Enter} } } } key.
Menu:
Paper Input
The screen for selecting paper set-
tings appears.
Paper Input:
Tray 1 Ppr.Size
C C C C
Press the { { { { # Enter} } } } key.
The following message appears:
Tray 1 Ppr.Size:
*Auto
D D D D
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Custom Size", and then
press the { { { { # Enter} } } } key.
Tray 1 Ppr.Size:
Custom Size
The screen for setting a custom size
appears.
Custom Size:
Horiz.
On Line Menu
Escape
Enter
210.0 mm
AAL002S