Ricoh CL1000N User Manual page 465

Ricoh cl1000n: user guide

Hide thumbs Also See for CL1000N:

Table of Contents

Use the "dhcp" command to configure the DHCP settings.

For more information about DHCP, see

The following command displays the current DHCP settings.

Configuration

You can configure the DHCP settings.

msh> dhcp interface_name {on|off}

Select [on] to enable DHCP. Select [off] to disable DHCP.

When the DNS server address and domain name are acquired from DHCP, be sure to select "on".

Operating Instructions

p.307 "Using

Administrator Reference

Chapters

Table of Contents