Ricoh CL1000N User Manual page 697

Configuring a Windows NT 4.0 computer
Follow these steps to configure a Windows NT 4.0 computer to use the TCP/IP protocol.
A
Open [Control Panel] and double-click the [Network] icon. Confirm that "TCP/IP Protocol" is
listed in the [Network protocols] box under the [Protocols] tab.
Note
If the TCP/IP protocol is not installed, click [Add] under the [Protocols] tab and install it. For
more information about installing the TCP/IP protocol, see Windows NT 4.0 Help.
B
Configure the TCP/IP protocols with the appropriate IP address, subnet mask and other settings.
Confirm that the settings are correct with the network administrator.
C
Click the [Services] tab, and confirm that "Microsoft TCP/IP Printing" is installed.
If "Microsoft TCP/IP Printing" is not installed, click [Add] under the [Services] tab, and install
it. For more information about installing and configuring network services, see Windows NT 4.0
Help.
Operating Instructions Client Reference
131