Copies; Collating - Ricoh CL1000N User Manual

Copies

Specify the number of copies.
copies=number of copies (1 to 999)
Limitation
❒ Do not specify "copies" and "qty
*1
"qty" is the function of collation.
The following samples show how to print 10 copies (host name: nphost, file
name: file1).
• rsh
% rsh nphost print copies=10 < file1
• rcp
% rcp file1 nphost:copies=10
• ftp
ftp> put file1 copies=10

Collating

Specify the number of collated sets.
qty=number of collated sets (1 to 999)
Limitation
❒ Do not specify "qty" and "copies" commands at the same time.
❒ You must either expand the SDRAM module or install the optional hard disk
drive. When neither is present, only one part is printed when you specify
"qty".
The following samples show how to print 10 copies using the collate function
(host name: nphost, file name: file1).
• rsh
% rsh nphost print qty=10 < file1
• rcp
% rcp file1 nphost:qty=10
• ftp
ftp> put file1 qty=10
*1
" commands at the same time.
Specifying the Device Option
1
25