Ricoh CL1000N User Manual page 119

Troubleshooting
It takes too much time to resume
printing.
It takes too much time to com-
plete the print job.
5
Images are cut off, or excess
pages are printed.
The color of the printout is dif-
ferent from the color on the
computer's display.
The color of the printout is dif-
ferent from the color specified.
Color changes extremely when
adjusted with the printer driver.
Photo images are coarse.
Color documents are printed in
black and white.
64
Status
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data is being proc-
essed. Just wait until it resumes.
If OHP transparencies or glossy paper is being used, printing
takes more time to start.
The printer was in the Energy Saver mode. To resume from
the Energy Saver mode, the printer has to warm up, and this
takes time until printing starts. To disable the Energy Saver
mode, select [Off] for [Energy Saver 1 ] in the System menu.
Photographs and other data intensive pages take a long time
for the printer to process, so simply wait when printing such
data.
Changing the settings with printer driver may help to speed
up printing.
See the printer driver's Help.
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data is being proc-
essed. Just wait until it resumes.
If "
printer is now warming up. Wait for a while.
If you are using paper smaller than the paper size selected in
the application, use the same size paper as that selected in the
application. If you cannot load paper of the correct size, use
the reduction function to reduce the image, and then print.
See the printer driver's Help.
The colors made using color toner are different from colors
displayed on the display in its production system.
See "Appendix", Client Reference.
When [Toner Saving] is checked under the [Print Quality] tab in
the printer driver's dialog box, the color gradation may ap-
pear differently.
See the printer driver's Help.
If a specific color is missing, turn the power switch off and
on. If this does not solve the problem, contact your sales or
service representative.
Do not extreme settings for the color balance under the [Print
Quality] tab in the printer driver's dialog box.
See the printer driver's Help.
Some applications lower the resolution for making prints.
The printer driver is not set up for color printing.
See the printer driver's Help.
Some applications print color files in black and white.
Possible Causes, Descriptions, and Solutions
" appears on the panel display, the
Warming Up...