Loading Paper In The Paper Feed Unit Type 1000 - Ricoh CL1000N User Manual

Paper and Other Media
E E E E
Make sure there is no space be-
tween the side guides and the en-
velope. If there is a gap, pinch the
levers on both ends inward (A A A A ),
and move the front guide till they
are flush against the envelope (B B B B ).
2
F F F F
Push in the side guide clamps to
press down the envelopes.
G G G G
Install the paper tray by pushing
it in until it clicks into place.
Important
❒ Be sure to insert the paper tray
completely. Otherwise, mis-
feeds might occur.
28
Loading Paper in the PAPER
FEED UNIT Type 1000
Note
❒ For more information about the size
and feed direction of paper that can
be loaded in the paper feed unit, see
p.17 "Paper and Other Media Sup-
ported by This Printer".
A A A A
Slide the paper tray out until it stops.
AAL752S
B B B B
Load paper into the tray with the
side to be printed facing up.
AAL753S
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
(T) inside the tray.
❒ The front and side guides should
be set to the correct paper size to
avoid paper feed problems.
❒ Load only plain paper in the pa-
AAL754S
per feed unit. To print on thick
paper, adhesive labels, OHP
transparencies or envelopes,
use the standard tray.
AAL217S
AAL220S