Configuring a WINS Server
The printer can be configured to register its NetBIOS name with a WINS server when power is turned
on. This enables the NetBIOS name of the printer to be specified from SmartDeviceMonitor for Admin
even under a DHCP environment.
This section describes how to configure the WINS server.
Note
The WINS Server is supported with Windows NT 4.0 Server Service Pack 4 or later, and Windows
2000 Servers WINS Manager.
For more information about the WINS Server settings, see Windows Help.
If there is no reply from the WINS Server, the NetBIOS name will be registered by broadcast.
The NetBIOS name consists of up to 13 alphanumeric characters.
Operating Instructions
Administrator Reference
311