Ricoh CL1000N User Manual page 25

Options
I I I I
Secure the controller board to the
machine by tightening the top
and bottom screws using the
screwdriver provided.
1
Note
❒ After finishing installation, you
can check whether the memory
unit is installed properly. Print
the configuration page from the
"List/Test Print" menu. If it is
installed properly, you will see
the memory capacity for "Total
Memory".
❒ The table below shows SDRAM
module total memory capacities.
Standard
128 MB
❒ If the memory unit is not in-
stalled properly, reinstall it from
A
step
properly even after attempting
reinstallation, contact your sales
or service representative.
18
Extended Total
64 MB 192 MB
128 MB 256 MB
256 MB 384 MB
. If you cannot install it
Reference
For printing the configuration
page, see "Printing a Configura-
tion Page", Administrator Refer-
ence.
Important
❒ Before using the new memory
unit, you must make settings in
the printer driver.
AAL137S