Ricoh CL1000N User Manual page 533

When each setting is acquired from the DHCP server
• IP address, subnet mask: set for each value leased by the DHCP server operating on a connected
interface. When overlapping IP addresses or identical IP addresses in the subnetwork are set at
this time, only the highest priority active value is set for the interface.
Note
The default priority interface is Ethernet.
• AutoNet: An automatic private address (169.254. xxx.xxx) is set for high priority interfaces.
• Gateway address, DNS server address, domain name: Settings are made for the DHCP-acquired
values that have the highest interface priority.
If the gateway address is outside the subnetwork range set by the interface, it operates as
"0.0.0.0".
Note
The default priority interface is Ethernet.
When the settings of the static IP addresses and the DHCP acquired value overlap
• IP address, subnet mask: When the static IP address and DHCP-acquired value (IP address) are
the same, or the static subnet mask value and DHCP-acquired subnet mask value overlap, the
interface (strikethrough : setting) set by the static IP (strikethrough : use the) address is available
using its value set. The interface set by DHCP is reset to the default.
• Gateway address: Uses the manually set value.
• When a gateway address is set outside the interface subnetwork range, it operates as "0.0.0.0".
Note
When the static IP address is not set, or is set as "0.0.0.0", the interface setting the DHCP
acquisition value is activated.
Operating Instructions Administrator Reference
308