Options
C C C C
Loosen the two screws and remove
the cover of the 802.11b interface
unit installation unit.
1
Note
❒ The removed cover is not used
when installing the interface
unit.
D D D D
Fully insert the 802.11b interface
unit.
Confirm that the 802.11b interface
unit is firmly connected to the con-
troller board.
22
E E E E
Tighten the two screws to secure
the interface unit.
F F F F
AAL145S
Attach the antenna to the card
with the label facing down and
the uneven side of the antenna
facing up.
G G G G
With the antenna and indented end
toward you, slowly insert the card
as far as possible into the interface
AAL152S
unit.
AAL153S
AAL154S
AAL155S