Ricoh CL1000N User Manual page 122

Status
The backs of printed sheets are
blemished.
If rubbed with your finger, it
smears out.
When printing on OHP trans-
parencies, a color is missing or
black or white dots are obvious.
When printing, dots are obvious. The registration roller is dirty. Clean the registration roller.
Possible Causes, Descriptions, and Solutions
When removing a jammed sheet, the inside of the printer
may have become dirtied. Print several sheets until they
come out clean.
If document size is larger than paper size, e.g. A4 document on
B5 paper, the back of the next printed sheet may be dirtied.
The setting of the paper may not be correct. For example, al-
though thick paper is used, the setting for thick paper may
not be set.
• Check the paper settings of this machine.
See p.19 "Types of Paper and Other Media".
• Check the paper settings of the printer driver.
See the printer driver's Help.
The fusing unit is deteriorated or damaged. Replace the unit.
Contact your sales or service representative.
The registration roller is dirty. Clean the registration roller.
See p.42 "Cleaning the Registration Roller".
See p.42 "Cleaning the Registration Roller".
Other Printing Problems
5
67