Ricoh CL1000N User Manual page 75

Paper and Other Media
Thick Paper
Paper thickness
Printer setup
2
Printer driver setup
Enabled paper feeding tray Tray 1
Number of sheets that can
be set
Two-sided printing
Additional cautions
Envelopes
Printer setup
Printer driver setup
Enabled paper feeding tray Tray 1
Number of sheets that can
be set
Two-sided printing
Additional cautions
20
2
105 - 210 g/m
Make the following two settings using the control panel:
• Press [Paper Input] menu, [Paper Type] and then [Thick Paper].
• Press [Maintenance] menu, and then [ThickPaper Type] to select
the regular paper thickness.
Click [Thick Paper] in the [Paper Type] list.
40
Note
❒ Make sure paper is not stacked higher than the LABEL upper
limit mark (T) inside the tray.
Not possible
Print speed is slightly slower compared to plain paper.
Make the following two settings using the control panel:
• Press [Paper Input] menu, [Paper Type], and then [Thick Paper].
• Press [Maintenance] menu, and then [ThickPaper Type] to select
[Thin Envelopes] or [Thick Envelopes].
Click [Thick Paper] in the [Paper Type] list.
15
Note
❒ Do not stack envelopes over the limit mark.
Not possible
• Check the print side is facing up.
• Check there is no air in the envelopes before loading.
• For better print quality, we recommend the right, left, top, and
bottom print margins to at least 20 mm (0.8") each.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge
going into the printer) by running a pencil or ruler across
them.
• Some kinds of envelope might cause misfeeds, wrinkles or
print poorly.
• Print quality on envelopes may be uneven if parts of an enve-
lope have differing thicknesses. Print one or two envelopes to
check print quality.