Ricoh CL1000N User Manual page 24

F F F F
Align the notches in the SDRAM
module terminal board with the
slots, and then insert the SDRAM
module at an angle.
G G G G
Push down the SDRAM module
until it snaps into position.
Installing Memory Unit Type C (SDRAM Module)
H H H H
Align the controller board to the
top and bottom rails, and then
push in slowly until it stops.
Note
❒ When installing other options on
the controller board, do not close
the controller board, but go to the
steps for installing the option.
AAL134S
Important
❒ The printer may not work prop-
erly if the controller board is not
set properly.
AAL135S
1
AAL136S
17