Printing Functions; Print Completion Beep; Checkered Mark; Center Mark - Ricoh 185 Operating Instructions Manual

Receiving a Fax Message

PRINTING FUNCTIONS

Print Completion Beep

By default, the machine beeps to let
you know when a received message
has been printed.
Note
3
You can alter the volume of the
beep or turn it off completely (set
the volume at minimum). ⇒ P.159
"Monitor Volume"

Checkered Mark

By default, a checkered mark is print-
ed on the first page of fax messages to
help you separate them.
Note
You can turn this feature off. ⇒
P.146 "INITIAL SETUP RX"

Center Mark

By default, marks are printed halfway
the left side and at the top center of
each page received. This makes it
easy for you to position a hole punch-
56
er correctly when you file received
messages.
Limitation
The center mark may deviate a lit-
tle from the exact center of the
edge.
Note
You can turn this feature on or off.
⇒ P.146 "INITIAL SETUP RX"

Reception Time

You can have the date and time when
a message was received at the bottom
of the received image. This feature is
turned off by default–turn it on with
ND1X00E5
Initial Setup RX. ⇒ P.146 "INITIAL
SETUP RX"
Limitation
When a received message is print-
ed on two or more sheets, the date
and time is printed on the last
page.
Note
The date and time when the mes-
sage was printed can also be re-
corded on the message. If you need
this feature, please contact your
service representative.
ND1X00E6