To Set Custom Syncs - Planar DOME Md4/PCX Installation Manual

58 Chapter 2

To set custom syncs

Right-click the desktop, and select Properties -> Settings
tab -> Advanced -> DOME tab -> Custom Mode.
The Custom Mode dialog box appears.
The Custom Mode dialog box enables you to perform
these tasks:
• Customize modes
• Create modes
• Remove modes
• Restore original modes (configuration file)
The mode changes you make are stored in a file, and
.dom
the driver loads the file at boot time. See "Restoring
.dom
the original modes" on page 61 for more information.