Table of Contents
Advertisement
48
7. Select Extend my Windows desktop to this monitor,
and click Apply.
The Display Properties dialog box appears with this
message:
Windows will now apply your new desktop settings.
The Original desktop is restored if the settings are not
applied correctly.
8. Click OK to accept the new settings or Cancel to revert
to the original settings.
Now that you've installed the driver for one display,
follow the instructions below to install the driver for
the sister display.
Not all boards support two displays. Boards with
part number 55-MD4PCX2-xx drive two monitors.
To determine the part number of your Md4/PCX
board, check the sticker with the CE mark on the
video connector.
To enable the sister display
1. Double-click the Add/Remove Hardware icon in the
Microsoft Control Panel.
The Add/Remove Hardware Wizard appears.
2. Click Next.
The Choose a Hardware Task appears.
3. Select Add/Troubleshoot a device, and click Next.
The Choose a Hardware Device dialog box appears.
4. Select Add a new device, and click Next.
The Find New Hardware dialog box appears.
5. Select No, I want to select the hardware from a list,
and click Next.
Chapter 2
Advertisement
Table of Contents
