Table of Contents
Advertisement
Installing the Md4/PCX Board and Driver in a PC
11. The Update Driver Warning dialog box appears.
12. Click Yes, then Next.
The Digital Signature Not Found dialog box appears.
13. Click Yes to continue the installation.
If the Digital Signature Not Found dialog box does
not appear, or you receive a warning that the driver
cannot be installed, see "Troubleshooting Tips" on
page 68.
The system copies the driver files.
14. Remove the diskette from the disk drive when the
copying is complete.
To finish the installation
1. Click Finish -> Close -> Yes to restart the computer.
When the system restarts, it prompts you to select an
operating system.
2. Select Microsoft Windows 2000 Professional and
log in.
3. Right-click the desktop, and select Properties ->
Settings tab.
4. Click Display list and select Default Monitor on
DOME Md4/PCX, Md5/PCX, or Md5/DFP.
5. Click Advanced -> Adapter tab -> List All Modes
button, highlight the desired resolution and refresh
rate, then click OK.
6. Click Apply -> OK from the Default Monitor and
DOME Md4/PCX, Md5/PCX, or Md5/DFP Properties
dialog box.
47
Advertisement
Table of Contents
