Table of Contents
Advertisement
Installing the Md4/PCX Board and Driver in a Sun PCI Workstation
Configuring the Windowing Environment
After you set the monitor mode, you can configure your
system to run either the OpenWindows or CDE windowing
environment.
To support color with the Md4/PCX board, you must use
only one head per board. If you are using two heads per
board, both heads must be grayscale, and both must have
the same resolution.
To run OpenWindows
Launch the OpenWindows server as follows:
For a one-headed system, type:
openwin -dev /dev/md4pcx0.0
For a two-headed system, type:
openwin -dev /dev/md4pcx0.0\
Each screen has a name of the form:
/dev/md4pcxy.z
where:
y=
z=
Board instances are assigned by the system.
For more information on
OpenWindows documentation.
-dev /dev/md4pcx0.1
board instance
head number (0 for first head, 1 for second head)
openwin
, refer to your Sun
103
Advertisement
Table of Contents
