Brake Cross Shaft Installation - Toro Diesel Z Master Service Manual

8. Remove brake cross shaft (Fig. 139).
Fig 139
9. Inspect brake cross shaft and bearings. Replace if
worn or damaged (Fig. 140).
B B
D D
C C
A A
Fig 140
A. Bolt (4)
B. Side fl ange bearing (2) D. Brake cross shaft
Z580/Z593/Z595 Diesel Service Manual
PICT-2964
B B
C C
A A
PICT-2968a
C. Nuts (4)

Brake Cross Shaft Installation

1. Slide the brake cross shaft into position (Fig. 141).
Note: The end of the cross shaft with two tabs is
installed on the left side of the machine.
Fig 141
2. Position a fl ange bearing onto each end of the cross
shaft with the fl ange facing outward (Fig. 142).
Fig 142
CHASSIS
PICT-2964
PICT-2970a
3-37
3