Toro Diesel Z Master Service Manual page 242

27. Install bearing shield (Fig. 755).
Fig 755
28. Install the square key onto the spindle shaft (Fig.
756).
Fig 756
Z580/Z593/Z595 Diesel Service Manual
29. Install the pulley hub on the spindle shaft (Fig. 757).
CLR DSC-2705
30. Install the heavy washer and nut on the top of the
spindle shaft (Fig. 758).
Note: The cup side of the washer should be facing
down toward the pulley hub.
CLR DSC-2706
MOWER DECKS
Fig 757
Fig 758
CLR DSC-2707
7
CLR DSC-2708
7-19