Toro Diesel Z Master Service Manual page 237

MOWER DECKS
7. Remove the top oil seal from the spindle housing
(Fig. 735).
8. Remove the tapered roller bearing from the top of
the spindle housing (Fig. 736).
7
7-14
Fig 735 CLR DSC-2675
Fig 736 CLR DSC-2676
9. Remove the spacer (Fig. 737).
Fig 737
10. Turn the spindle housing over and remove the oil
seal from the bottom of the spindle housing (Fig.
738). Note the orientation of the lower oil seal. The
open end of the seal faces outwards to help relieve
pressure from over-greasing the spindle assembly.
Fig 738
Z580/Z593/Z595 Diesel Service Manual
CLR DSC-2677
CLR DSC-2679