Toro Diesel Z Master Service Manual page 241

MOWER DECKS
23. Install the seal. Press it fl ush with the top of the
housing (Fig. 751).
Note: The open lip of the seal faces inward.
24. Install the bearing shield and the seal spacer onto
the spindle shaft (Fig. 752).
7
7-18
Fig 751 CLR DSC-2696
Fig 752 CLR DSC-2702
25. Lower the spindle housing over the spindle shaft
(Fig. 753).
Fig 753
26. Install the seal spacer on the top of the spindle
housing (Fig. 754).
Fig 754
Z580/Z593/Z595 Diesel Service Manual
CLR DSC-2703
CLR DSC-2704