Toro Diesel Z Master Service Manual page 302

52. Install .013" (.33mm) thickness of shims onto the
open end cap (Fig. 979).
Note: The shim color corresponds to its thickness:
Blue: .005" (.127mm) thick
Green: .003" (.076mm) thick
Brown: .010" (.254mm) thick
Fig 979
53. Install a new end cap o-ring (Fig. 980).
Fig 980
Z580/Z593/Z595 Diesel Service Manual
54. Apply a protective fi lm onto the shaft keyway.
55. Install the open end cap assembly over the cross
shaft and onto the gearbox (Fig. 981).
IMG-8561
56. Install 4 new bolts securing the open end cap to the
gearbox housing. Torque the bolts to 280 – 325 in-
lbs. (31.6 – 36.7 Nm) (Fig. 982).
Note: Tighten the bolts in a crisscross pattern.
IMG-8562
MOWER DECKS
Fig 981
Fig 982
IMG-8559
7
IMG-8582a
7-79