Toro Diesel Z Master Service Manual page 155

ENGINE
63. Inspect the 3 sets of engine isolation mounts and
spacers. Replace if damaged or worn (Fig. 469).
Note: The engine isolation mounts come in pairs.
If one half of the pair is damaged, the whole
mount should be replaced.
A A
5
A. Half of the engine isolation mount
B. Spacer
C. Half of the engine isolation mount
64. Remove the 5 stub shaft mounting bolts (Fig. 470).
5-18
B B
C C
Fig 469 PICT-3631a
Fig 470 PICT-3640
65. Remove the stub shaft from the fl ywheel (Fig. 471).
Fig 471
66. Remove the rear engine mount bracket from the
engine by removing the 4 bolts and lock washers
securing it to the engine (Fig. 472).
Fig 472
Z580/Z593/Z595 Diesel Service Manual
PICT-3642
PICT-3635