Toro Diesel Z Master Service Manual page 82

21. Position the left hand control lever to the left hand
control shaft arm. Install 2 bolts, and washers
securing the left lever to the control shaft arm (Fig.
223).
Fig 223
22. Position the right hand control lever to the right
hand control shaft arm. Install 2 bolts, and washers
securing the right hand lever to the control shaft arm
(Fig. 224).
Fig 224
Z580/Z593/Z595 Diesel Service Manual
23. Adjust the control handle neutral position. Refer to
"Adjusting the Control Handle Neutral Position" on
page 4-25.
24. Adjust the hydrostatic pump neutral. Refer to "Set-
ting the Hydrostatic Pump Neutral" on page 4-27.
25. Insert the pocket into the traction frame (Fig. 225).
PICT-3098
PICT-3064a
CHASSIS
Fig 225 PICT-3057
3
3-59